Product Identification
【Product Name】1-Chloro-3-methyl-2-butene
【Synonyms】3-Methylcrotyl chloride;氯代异戊烯
【CAS】503-60-6
【Formula】C5H9Cl
【Molecular Weight】104.57
【EINECS】207-972-7
【Beilstein/Gmelin】878156
【Beilstein Reference】4-01-00-00823
Physical and Chemical Properties
【Appearance】Clear, colorless liquid.
【Solubility in water】Insoluble
【Boiling Point】25℃
【Density】0.9273 g/cm3 (20℃)
【Vapor Density】3.61
【Refractive Index】1.4485 (20℃)
First Aid Measures
【Ingestion】Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
【Inhalation】Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
【Skin】Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
【Eyes】Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).
Handling and Storage
【Storage】Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry place. Keep container closed when not in use. Flammables-area.
【Handling】Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or flames.
Hazards Identification
【Inhalation】Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause systemic effects. May cause burning sensation in the chest.
【Skin】Causes skin burns. May cause cyanosis of the extremities. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
【Eyes】Causes eye burns. Lachrymator. May cause chemical conjunctivitis and corneal damage.
【Ingestion】May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. Ingestion of large amounts may cause CNS depression. May cause systemic effects.
【Hazards】Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will sp along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
【UN (DOT)】1993
Exposure Controls/Personal Protection
【Personal Protection】Eyes: Wear appropriate protective eyeglasses or chemical safety ggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
【Exposure Effects】Effects may be delayed.
Fire Fighting Measures
【Flash Point】4℃
【Fire Fighting】Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be sp by the use of water. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.
【Fire Potential】Flammable liquid.
Accidental Release Measures
【Small spills/leaks】Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.
Stability and Reactivity
【Stability】Stable under normal temperatures and pressures.
【Incompatibilities】Strong oxidizing agents.
【Decomposition】Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
【Combustion Products】Fire may produce irritating, corrosive and/or toxic gases.
Transport Information
【UN Number】1993
【Hazard Class】3
【Packing Group】I; II; III